Jump to content
Sign in to follow this  
riggy77

Update to Shuttle & WiDi, Push2TV3000

Recommended Posts

Hello

 

Back in March I was asking a question on this forum about which Wireless PCIe card to purchase for my Shuttle SZ77R5. You may remember that this is a desktop machine with an Intel i7 3770 3.4Ghz Socket 1155 CPU which I bought to take advantage of the Intel Wireless Display (WiDi) technology.

 

To update you, I got an Intel Centrino Ultimate-N 6300 (with 3 UF.L sockets) from amazon.co.uk along with 2x Internal 3G/4G WWAN / WLAN Wireless Antenna. This allowed me to connect the wires from one of the antenna to sockets 1 and 2, then I connected one of the wires from the other antenna to socket 3. The remaining wire I strapped up inside the case along with any excess wire so that there was no chance of anything shorting out whilst moving the shuttle around. Having tested the wireless I was pleased to find it picked up both the 2.4Ghz and 5Ghz signals from my dual –band router without any problem.

The next step was to wait as the Netgear Push2TV3000 did not arrive in the UK until the end of June. Trying to get it to work was even harder and I soon ended up chatting to several Netgear operators over several hours. For reasons that I wont bore you with now, I ended up sending the PTV3000 back to the outlet I bought it from as I figured there must have been something wrong with it.

 

Now the replacement has arrived and I still can’t quite get it to work properly. I have wiped the hard disk clean and re-installed Windows 7 Pro 64-Bit. I carefully installed the software in exactly the right order 1. Graphics 2. Wireless adaptor 3. Intel WiDi 4. WiDi Widget (optional). The WiDi software doesn’t generally have a problem finding the PTV3000, (unless it gets confused in which case I just remove the power for about 10 seconds.) When I click connect it then says that it is connecting and both the TV and the monitor flash a blank display as if it were successful but unfortunately the TV display just stays blank (black screen.) Other errors that I have experienced are “HDCP authentication failed” (on TV screen) which I thought I had resolved by buying a HDCP compliant HDMI cable, “RTSP closed by the source” (also on TV screen) – not sure what that means and "One or more of the required Intel ® WiDi audio devices has been disabled or removed. Intel ® WiDi cannot stream without these audio devices. Please enable these audio devices or reinstall Intel ® WiDi." (as shown on the PC monitor.)

 

Has anybody had any success with solving WiDi problems – especially those with desktop machines? Any suggestions will be gratefully received!!

 

Thanks for your time. :)

 

Rich

Share this post


Link to post
Share on other sites

Never fooled with widi before, but I can say that any hdmi cable should work for hdcp auth. Also, RTSP is Real Time Streaming Player, so I would assume that's just a warning the app crashed on the computer and it's showing it on the tv.

 

After googling this whole thing for awhile and reading over your post again, looks like it boils down to driver/application issues. The net seems full of issues with WiDi just not working properly yet. Hopefully someone actually with this working comes by!

Share this post


Link to post
Share on other sites

HelloThank you for reading this thread and thanks to wdeydwondrer for your comment. It would seem that I am not the only person interested in getting WiDi technology in a desktop machine after all!! There are in fact many people who want to enable this feature as I found out when I posted a similar thread to this one on the Intel Support Community forum which you can read here:https://communities.intel.com/message/201152#201152In that thread a user called joe_intel was less than confident about solving my issues. There had been other users who were “testing the water” by posting comments such as “Desktop WiDi” as recently as just a few weeks ago. I don’t know how I missed them – they must’ve been hidden away where I couldn’t spot them. In those cases, joe_intel told them the same as he told me (paraphrased):The system is custom built, WiDi was not preinstalled, the wireless adapter integration has not be validated or certified. The wireless adapters are meant to be professionally installed by OEM technicians. And finally that the wrong adapters are being used (Intel recommend one from the “For Desktop” range! I did not want one that would have an antenna suspended in mid-air outside of the machine.)At the bottom of Joe’s comment you will see that his only other solution is to roll back the driver. He directed me to http://communities.intel.com/message/198908#198908 where some people who had got WiDi working went on to describe a blank (black) screen after the graphics driver was updated. They got it working again by rolling the driver back. So I went to the download center and installed the following graphics file (for Desktop machines): Version 15.31.3.64.3071 (9.17.10.3071) for 3rd generation CPU. I wasn’t sure if I would need to reinstall the Wireless PROSet and WiDi software to maintain the order that Intel are requiring but I decided to give it a go anyway. The Acer Touchscreen T231H (not the Samsung Smart TV) started displaying the desktop before the WiDi software finished verifying the adapter! :)There is however a problem in that the screen keeps disconnecting itself in much the same way that other users of these forums have described. I am hoping that this temperamental nature is just a teething problem and will go away but I have my doubts. Can anybody point me in the direction of an answer to this next hurdle?(Maybe this post will help someone else get their equipment working too!)Many thanks for your time once again.Rich

Share this post


Link to post
Share on other sites

Not DIRECTLY to your problem, but if you did get a card designed for the desktop and you felt up to modding, the antenna could always be removed, rewired, and relocated.

 

But you are more or less dead on, this is a newer standard (I haven't even seen a system using it in person yet). Early adopters will always have the most problems. The Intel forum would indeed be the best place to keep trying to ask questions as they are far more likely to have worked with their own hardware.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...